Wood Carbonization Furnace

Introduction

1.The  stove used to change biomass briquette into charcoal briquette Carbonization furnace is a stove used to change biomass briquette into charcoal briquette. 

2.The quality and efficiency of kiln affect final forming of charcoal briquette greatly. This furnace is ideal equipment for wood briquettes to have anoxic distillation carbonization. 

3.Due to its rational structure, the furnace only needs small quality of heat consumption

Feature

1.Rational structure, uniform furnace temperature, small upper & lower temperature difference in working zone, especially applicable for heating and heat treatment for long axial workpiece.

2.Adopt energy-saving furnace lining, fast temperature rise, low empty furnace consumption, save more than 20% of energy compare with old product.

3.The furnace lid is designed into both open-type and integral-type; workpiece can be hung inside or outside the furnace for user to make selection according to different needs.

4.The control system can be equipped with normal control instrument or instrument with micro-processor program control according to actual need.

5.When needed during process, protective atmosphere can be fed into the furnace to realize little-oxidizing heating.

6.Each product is installed with safety interlock and over-temperature device to provide reliable and safe operation and use.

7.Can use different pit-type heating furnaces, tempering furnaces and can be equipped with quenching tank and cleaning machine to form pit-type heat treatment furnaces production line and thus expand the technology application scope and production capacity of the heat treatment of pit-type furnace.

Working principle:

 1.Charcoal Stove to gas furnace for heat-grown, use of methane gas through the cyclone, with air into the burner. Combustor outlet temperature can reach to 800°C ~ 1200°C, the flow rate up to 3 to 5 meters per second, resulting in high temperature air in the combustion chamber external heating.

2.Note: during heating, furnace temperature at 100 °C ~ 150 °C maximum humidity when the furnace, per kilogram of fuel rods into the kiln, the into 4 ~ 8% water, 1700kg of raw materials can be brought more than 100 kg of water, the water were is the enemy of carbonization.

3.Because charcoal fuel rods fear damp, wet or crushed into powder, seriously affected the quality of carbonization, so the system is essential tide row key, behind tide time 1 ~ 1.5 hours.

4.When the carbonization chamber furnace temperature rose to 300 °C, the furnace produced a large number of combustible gases. In theory, per kilogram of raw materials can produce 3 cubic methane gas, the gas temperature for carbonization, drying heat source to use, free to adjust the level of furnace temperature, low temperature carbon is generally more than 400 °C (8 hours to complete), high temperature carbon above 600 °C (10 hours to complete).

Service                                           

1. Before Sale: help you to set a purchase plan according to your requirment

2. During Sale: accompany you to check the performance of the machine; train technical stuff for you

3. After Sale: Sent artisan to your place and help you with the installation