| Model | TG500A | TG1000A |
| | | |
| Rated capacity | 500VA(300W) | 1000VA(600W) |
| Input | Commerical power range | 145VAC-280VAC |
| AVR range | 165VAC-270VAC |
| Frequency | 50Hz±10% |
| Output | Commerical power | Sine-wave |
| Inversion | Simulated sine-wave |
| Frequency | Commercial power supply:shared frequency with the commercial inversion state:50Hz±0.5 |
| AVR voltage range | 220VAC±10%(Auto-sensing) |
| Transfer time | Typical:5ms(Including detection time) |
| Protection | Overload | UPS automatically shutdown if overload exceeds 150% of normal value for 30 seconds and 180% for 3 seconds |
| TEL/FAX/MODEM | No |
| Short circuit | UPS Output is cut off immediately or input circuit breaker protection |
| Alarm | Battery back-up | Beeping sound every 4 seconds when the input is cut off |
| Battery low voltage | Beeping sound every 1 seconds when the input is cut off |
| Overload | Continuously beeping sound when overload |
| Battery | Type | Sealed,maintenance-free lead acid |
| Capacity | (12V,7AH)X1 | (12V,7AH)X2 |
| Recharge time | 8 Hours to 90% of full capacity |
| Back-up time | Typical 20 min(Halfload) |
| Battery protection | Automatic self-test,discharge protection |
| Communication interface | RS232(port)(B) | Bi-directional communication port(Compatible with Bpro500A/600A Bpro-1000/1200a) |
| Appearance | Net weight | 5.8kg | 12kg |
| Gross weight | 6.1kg | 12.5kg |
| Size(mm)DxWxH | 260x97x135 | 375x130x190 |
| Outside Packing | Weight | 19kg | 28.5kg |
| Quantity | 3 | 2 |
| Size(mm)DxWxH | 455x366x228 | 495x460x315 |
| Remark | Communication port: NO |
| Specification only for reference . Subject to change without prior notice |
| We accept order with special specifications |